With sales of the 2010 Chevy Camaro starting in the first quarter of 2009, it's inevitable that a variety of tuner versions will be popping up left and right. Deviant Art member Morfiuss decided that was too long to wait and beat everyone to the punch with his photoshopped rendition of a Hamann Camaro. We think he did a stellar job, penning in a new front fascia, side skirts, flared fenders, 20-inch rims, and gullwing doors that depict what Hamann would probably do if they got their hands on a Camaro. It's not likely to happen, but it does beg the question -- how would you tune the Camaro? Would you build a Euro-style version similar to the Hamann, or how about an all-out drag racer set for ten second time slips? Our pick? A street/track version styled after the Mark Donohue's Penske Camaro that was so dominant in the Trans-Am series in the late 1960's.
Click above for a high-res gallery of the Fox/Artisan Lexus IS-F.
The 2009 Lexus IS-F is slated to get some serious attention at SEMA, and Fox Marketing and Artisan are out to prove that show and go aren't mutually exclusive.
The plan is to create an IS-F that has the power to match its presence, and to that end, Artisan developed a twin-turbo setup that huffs compressed oxygen into a 5.0-liter V8 equipped with JE pistons and Crower rods. With a Mishimoto radiator, an Artisan exhaust, a healthy amount of boost and a thorough tune, Artisan is estimating over 600 hp at the rear wheels.
Aesthetically, the team sought to compliment the stock IS-F's styling, so they've fitted a bespoke body kit consisting of custom front and rear bumpers, and a set of side-skirts that cleanly integrate into the blistered rear fenders. iForged rollers fill the wheel wells, sized 20x9.5-inches in front and 20x11.5-inches in the rear, and wrapped in Toyo T1R tires (255/35R20 front and 305/30R20 rear). The Glasurit Sunset Orange hue is courtesy of BASF, and according to Brian Fox, they'll be blacking out the headlamps, grille and emblems to tie everything together.
Artisan plans to have its IS-F exhaust on sale next month, and when we check out the Lexus booth this November, we'll be able to see Fox/Artisan's efforts in person, along with a handful of other tuned and tweaked IS-Fs.
Click above for a gallery of the HKS Nissan GT-R GT570.
Serious Nissan GT-R tuners aren't coming out of the woodwork – yet – but one of Japan's largest aftermarket firms has thrown its hat into the ring, and to good effect. HKS will begin offering its GT570 kit to consumers in Japan later this year (no word on U.S. distribution) and as it's name implies, output is getting close to the 600 hp mark. The package includes new wastegate actuators for the stock turbos and an electronic boost controller, along with aluminum intercooler piping, silicon hose couplers and straight pipes that replace the stock catalytic converters, reducing back pressure, but negating the GT-R's road-legal status.
All of those tweaks add up to a total of – you guessed it – 570 PS, or 562 hp and 540 lb.-ft. of torque at the wheels. Check the gallery below to see the dyno charts and a few shots of the wastegate and plumbing mods.
Hyundai made a huge splash at the New York Auto Show this year with its Genesis Coupe, and it's looking for a repeat performance next month at the SEMA Show in Las Vegas. The Koreans are working with several aftermarket tuners to create special coupes for the tuner show and they just passed along a photo of one of them. This example was created by HKS USA and includes the usual array of body work mods along with plenty of mechanical upgrades. Hyundai hasn't provided details on the engine re-work yet other than noting it's got an HKS GT Turbo package, so presumably this car will use the 2.0L turbo four-cylinder as its starting point. Since the guts of the engine are being beefed up, we can safely assume this thing will be running considerably higher boost than a stock Genesis. Hopefully the HKS Hipermax III fully-adjustable suspension will help make all this power usable on the street as well as the track. The Genesis Coupe may just yet prove to be a very formidable competitor to all those new Mustangs, Camaros and Challengers appearing over the next few months, and we can't wait for our chance to drive one.
If you've ever had the need to raise one side of your car, truck, RV or trailer a couple feet off the ground, the Titan Exhaust Air Jack is there to give you a lift. Quite simply, the jack is nothing more than a heavy-duty balloon inflated by the exhaust gas of your own vehicle. Once the deflated bag is placed under the vehicle, the Air Jack's inflation hose is connected to the vehicle's exhaust pipe. The engine is started and hot gasses are forced into the bag until the woven PVC-coated polyester bag lifts a vehicle a full 30 inches off the ground, which is plenty of height to get the wheels off the ground for most vehicles. With prices starting around $120, the device offers several advantages over traditional jacks. First, it can be used on soft surfaces (mud, sand, or snow) where other jacks just don't work. Second, it easily lifts one whole side of the vehicle at once, saving tons of time. Best of all, the low pressure bag doesn't require placement on normal jacking points so you more freedom to lift where you want and then place jack stands exactly where you need them. The military and emergency services have apparently been using jacks of this type for years, so the idea isn't just full of hot air.
Wald International has never been one to offer subtle styling. Whether it's the Lexus IS-F or the Mercedes-Benz CL, the Japanese tuner loves to create a bold look with vents, wings and wheels. The tuner recently turned its attention to the Nissan GT-R, and while we don't have official information on the car, the photos offer a good look at what the package will include. A vented front fascia and splitter, side skirts, rear fender flares, a rear diffuser, carbon fiber rear spoiler and 22-inch wheels all lend to the more aggressive look. We actually like the majority of the body kit, although we'd prefer the rear fender flares to be the same color as the body, and the larger wheels probably don't do much for the performance of the car. In the end, though, we'd probably spend our hard earned money on some of the Club Sport components from NISMO. Thanks for the tip, James!
Weds Sports, a Japanese wheel-maker, has created a full carbon fiber wheel -- rims, spokes, hub, everything -- that weighs 2.76 kg. Coming out to about 6.1 pounds, that's about half the weight of the Dymag carbon fiber wheel with a magnesium rim that you'll find on a Callaway Corvette, and just over a pound more than Dymag's all-carbon race-specific front wheel for a motorcycle.
According to a rough translation of Weds' literature, they use a dry carbon fiber process that makes the wheels strong enough for... well, we're not really sure. While the rims look absolutely ace, we can't find any other company that makes an entire wheel out of carbon fiber, and Weds apparently hasn't yet put them in production, which leads us to think that these babies were meant only for the scales at the Tokyo Auto Salon. But if you have $12,000 for a set of four, and you live in an area with no potholes and no curbs, these could be the rims for you.
NISMO has finally released all the details on its line of upgrades for the R35 Nissan GT-R, and per usual, there's good news and bad news.
On the positive side, the parts are the typical blend of OEM quality and fitment, with a focus on tighter handling and weight reduction. The Club Sport tuning package includes the Chassis pack made up of race-tuned Bilstein Damptronic adjustable dampers sheathed in 18.5kg/mm (front) and 9.6 kg/mm (rear) springs. The combination of rock-hard coils and adjustable damping at both low and high speeds should make the GT-R stickier in the corners and more stable while bombing through a fast sweeper. Rounding out the handling package is a set of Rays forged aluminum wheels, sized 20x9.5-inches in front (+45mm offset) and 20x10.5-inches (+25mm offset) in the rear, and wrapped in Bridgestone RE070R run-flats, sized 225/40 and 285/35, front and rear. These are rumored to be the same rollers we'll see on the Spec-V when it's unveiled in Paris this October.
The rest of the parts focus on weight reduction, beginning with a lightweight axle-back exhaust that drops 11 pounds from the GT-R's curb weight, along with a carbon fiber undertray that reduces air turbulence and parasitic drag. Upgraded carbon-fiber backed and leather-trimmed seats are also part of the package, which retains the side airbags but nixes the electronic controls, reducing weight by another 13 pounds total. Naturally, some NISMO badging rounds out the upgrades.
Now here's the bad news: the parts are only available in Japan as a package, can only be installed by 12 NISMO-authorized shops and come in at a whopping ¥5,460,000 (over $50,000). However, some U.S. importers have already worked out a distribution deal with NISMO, but for those of us in the States, we don't get the added benefit of the three-year/60,000 km warranty.
Of all the trucks that have proliferated into the Mercedes-Benz line-up, the GLK isn't exactly the most aggressive. But according to the latest reports, Mercedes is lining up an array of aftermarket tuners at the SEMA show to infuse what appears to be more than a little testosterone into the compact sport-ute.
First up to bat is RENNtech, the Florida-based company responsible, among other things, for the bringing the McLaren SLR 722 to America and actually getting it to produce 722 horsepower. RENNtech has taken inspiration from the Pikes Peak challenge – one of the most iconic and power-craven hill-climb events in the world – to create this hardcore GLK. Little is known in the way of details, but the vehicle is said to feature RENNtech's first performance hybrid drivetrain.
Brabus, Blvd Customs and Legendary Motorcars are also said to be preparing modified GLKs for SEMA, although Mercedes has not yet confirmed its participation in the show. While we wait for that, check out the images in the gallery below.
Pirelli has announced a further innovation in the ongoing quest to remove the driving from driving. Sensors have been stashed in tires already for the hasty implementation of TPMS, but Pirelli has taken it a step further, putting a sensor package on the tire carcass itself. One implementation of the "Cyber Tire" is the "Lean," which harnesses power from the vibrations of the vehicle and beams information including tire pressure, temperature, and load to the vehicle's computer.
Cyber Tire Lean is setting things rolling for the eventual trotting out of full-blown Cyber Tire, which will be built into the tire. The high tech rubber will be more sophisticated and capable of communicating directly with stability control and anti-lock brakes to improve the effectiveness of dynamic safety systems. Cyber Tire will also carry a three-axis accelerometer that will facilitate real-time calculations of friction coefficients, contact force, and load. Pirelli is most proud of the edge the Cyber Tire will give the nanny systems to catch and correct idiotic driving faster than ever before.
Paris Preview: Officially Official, Honda's new hybrid is the Insight!
Mazda Kiyora city car concept, MX-5 facelift head to Paris
Leaked: Official updated Mazda MX-5 image
Reader Spy: Chevy Volt caught on set of Transformers 2
Spy Shot: Production interior of Chevy Volt (maybe)
In the Autoblog Garage: 2009 Jaguar XF Supercharged
By the Numbers - August 2008: New Digs Edition
In the Autoblog Garage: KITT Shelby GT500 KR
First Drive: 2009 Cadillac CTS-V
In the Autoblog Garage: 2009 Nissan Murano
